Filter
Top Products
Using the Ethernet Card
6-25
3. From the Installation Options screen, select
Product
Options
and press Enter.
4. From the Other Installation Items/Products list, select
Configure Network Protocols and press Enter.
5. From the Internetworking Configuration list, select
Protocols and press Enter.
6. From the Protocol Configuration list, select
IPX and press
Enter.
7. In the IPX Protocol Configuration dialog box, make sure
the Routing Protocol is set to
RIP/SAP Only. If it is not,
select
NLSP with RIP/SAP Compatibility and press
Enter
, then select
RIP/SAP Only
and press
Enter
.
Installing EPSON Net! for DOS
If you have Novell NetWare, you can install EPSON Net! on
your DOS computer. Insert the EPSON Stylus COLOR 850N
CD-ROM in your drive and use the DOS COPY command
(
COPY D:\FILENAME.*
) to copy the following files to a
network directory or to your hard drive:
D:\EPSONNET\DOS\EPNWDE.EXE
D:\EPSONNET\DOS\EPNWDE.DAT
See your Setup Guide to use EPSON Net! to configure the
printer’s Ethernet card.
Note:
This utility requires a
minimum of 480 KB of
conventional memory.
See Appendix A if you
need to create diskettes
and use them to install
EPSON Net!.
basket-6.fm Page 25 Wednesday, May 13, 1998 4:37 PM