Filter
Top Products
Introduction
8
Important Safety Instructions
Before using your printer, read the following safety instructions
to make sure you use the printer safely and effectively:
◗ Turn off and unplug the printer before cleaning. Clean
with a damp cloth only. Do not spill liquid on the printer.
◗ Do not place the printer on an unstable surface or near a
radiator or heating vent.
◗ Do not block or cover the openings in the printer’s cabinet
or insert objects through the slots.
◗ Use only the type of power source indicated on the printer’s
label.
◗ Connect all equipment to properly grounded power
outlets. Avoid using outlets on the same circuit as
photocopiers or air control systems that regularly switch
on and off.
◗ Place the printer near a wall outlet where the plug can be
easily unplugged.
Placez l’imprimante près d’une prise de contacte où la fiche
peut être débranchée facilement.
◗ Do not let the power cord become damaged or frayed.
◗ If you use an extension cord with the printer, make sure
the total ampere rating of the devices plugged into the
extension cord does not exceed the cord’s ampere rating.
Also, make sure the total ampere rating of all devices
plugged into the wall outlet does not exceed the wall
outlet’s ampere rating.
◗ Except as specifically explained in this User’s Guide, do not
attempt to service the printer yourself.
Caution:
Always turn the printer
off using the
Ppower
button. If you’re using a
power strip, do not
switch it off or unplug the
printer until the
P
power
light is off.
basket-int.fm Page 8 Wednesday, May 13, 1998 11:34 AM