Filter
Top Products
Technical Specifications
C-9
Graphics:
ESC ( G, ESC ., ESC ( i, ESC ( e, ESC ( \, ESC ( s
Color:
ESC r, ESC ( r
Printing mode:
ESC ( K
IBM X24E emulation
control codes
This printer emulates the IBM Proprinter with the following
commands. For detailed information, see IBM’s X24E reference
manual.
General operation:
NUL, DC3, ESC j, BEL, CAN, DC1, ESC Q, ESC [ K, ESC U
Paper feeding:
FF, LF, ESC 5, ESC A, ESC A (AGM*), ESC 0, ESC 1, ESC 2,
ESC 3, ESC 3 (AGM*), CR
Page format:
ESC C, ESC X, ESC N, ESC O, ESC 4
Print position motion:
ESC d, ESC R, ESC D, HT, ESC B, VT, ESC J, ESC J (AGM*)
Font selection:
DC2, ESC P, ESC :, ESC E, ESC F, ESC I
Font enhancement:
DC4, SO, ESC SO, ESC W, ESC [ @, SI, ESC SI, ESC G, ESC H,
ESC T, ESC S, ESC -, ESC _
Spacing:
BS, SP, ESC [ \
Character handling:
ESC 6, ESC 7, ESC [ T, ESC ^, ESC \
Bit image:
ESC K, ESC L, ESC Y, ESC Z, ESC [ g, ESC * (AGM*)
* Alternate Graphics Mode
Character Tables
All character tables except Italic are the same as the PC437 table for
hex codes 00 through 7F. Additional characters are available for hex
codes 80 through FF. You can select the following character tables
through the control panel or software commands:
◗ PC 437 (U.S./Standard Europe)
◗ PC850 (Multilingual)
◗ PC860 (Portuguese)
◗ PC861 (Icelandic)
◗ PC863 (Canadian-French)
◗ PC865 (Nordic)
basket-c.fm Page 9 Wednesday, May 13, 1998 3:23 PM