Filter
Top Products
Using the Ethernet Card
6-11
5. Create an initialization file in the remote print service
directory:
◗ For TCP/IP, type:
REMPRT <card serial number> <port name>
◗ For NetBEUI, type:
REMPRT3 <card serial number> <port name>
6. To ensure that remote print service is initialized each time
you start your workstation, edit the STARTUP.CMD file
in your root directory to include the initialization file on
the last line:
◗ For TCP/IP, type:
\EPNET\REMPRT @ REMPRT.INI
◗ For NetBEUI, type:
\EPNET\REMPRT3 @ REMPRT3.INI
7. Use the LAN Server Administration program (NET
ADMIN) to add newly configured printers to the list of
shared resources. See your OS/2 documentation for more
information.
Obtaining Printer Status for Piped Ports
You can obtain printer status for each piped port on your
workstation by typing the REMSTAT command:
◗ For TCP/IP, type
REMSTAT
◗ For NetBEUI, type REMSTAT3
After sending the REMSTAT command, your printer will
return messages similar to these:
◗ ITC Remote Print Servers active for 850NPRN—
Printer Busy
◗ ITC Remote Print Servers active for 850NPR2—Printer
Ready
basket-6.fm Page 11 Wednesday, May 13, 1998 4:37 PM