Filter
Top Products
Technical Specifications
C-8
Changing control
panel settings
Follow these steps to change the settings listed above:
1. Make sure the printer is turned off and has paper loaded.
2. Hold down the
X color cleaning button and press the
Ppower
button. The printer prints a summary of instructions for
changing settings and choosing the language to use for additional
instructions.
3. Press the
X
color cleaning button to print a list of current settings
and additional instructions.
4. After you make the changes you want, turn the printer off to save
the settings. The settings remain in effect until you change them
again.
Control Codes
ESC/P 2 control codes See the
ESC/P
®
Reference Manual
for more information about these
commands.
General operation:
ESC @, ESC U, ESC EM
Paper feeding:
CR, FF, LF, ESC 0, ESC 2, ESC 3, ESC +
Page format:
ESC ( C, ESC C, ESC C 0, ESC Q, ESC l, ESC ( c, ESC N, ESC O
Print position motion:
ESC $, ESC \, ESC ( V, ESC ( v, ESC D, HT, ESC B, ESC J, VT
Font selection:
ESC k, ESC x, ESC X, ESC P, ESC M, ESC g, ESC p, ESC 4, ESC 5,
ESC E, ESC F, ESC !
Font enhancement:
ESC W, DC 4, SO, DC2, SI, ESC w, ESC G, ESC H, ESC T,
ESC S, ESC -, ESC ( -, ESC q
Spacing:
ESC Space, ESC c, ESC ( U
Character handling:
ESC t, ESC ( t, ESC R, ESC %, ESC &, ESC :, ESC 6, ESC 7,
ESC ( ^
Bit image:
ESC *
Network I/F mode Off, On
Loading position 8.5 mm, 3 mm, Others
Economy Off, On
Setting Options
basket-c.fm Page 8 Wednesday, May 13, 1998 3:23 PM