Filter
Top Products
Using the Ethernet Card
6-13
Configuring for UNIX
The printer’s Ethernet card supports many standard UNIX
commands and can be configured from any computer on the
network without using the utility program.
The EPSON Stylus COLOR 850N functions as a remote
printer for systems using TCP/IP Ethernet transfer with remote
printing protocol (lpr) or standard file transfer protocol (ftp).
After the printer has been set up on the network, any computer
on the network can send a print file to it, as long as the
computer has the printer’s name and IP address in its directory.
The following sections explain how to set up and use the printer
with UNIX:
◗ Setting Up the Printer as a Network Device
◗ Setting Up the Printer as a Remote Printer
◗ Printing with Standard UNIX Systems
◗ Printing with Other UNIX Systems
Setting Up the Printer as a Network Device
Before you begin, make sure you:
◗ Set the printer’s IP address
◗ Make sure the Ethernet card and the printer are on the
same segment of the network as the computer you are using
to configure them
◗ Find out the hardware address for the Ethernet card from a
status sheet (see page 6-3)
◗ Find out the IP address for your computer and the IP
address that you will assign to the Ethernet card.
basket-6.fm Page 13 Wednesday, May 13, 1998 4:37 PM