Filter
Top Products
1-2
Setting Up the Printer
L
R4C7930
shrimp.bk Rev.C
shrimpsetup.fm A5 size
11/26/01 Pass 1
Proof Sign-off:
ABE Y. Azuma A. Nagasawa
T. Takahashi
ABE S. Halvorson
Choosing a Place for the Printer
❏ Place the printer on a flat, stable surface. The printer will not
operate properly if it is tilted or placed at an angle.
❏ Place the printer where you can easily connect it to a
network interface cable, if necessary. Leave adequate room
around the printer for easy operation and maintenance.
❏ Avoid using or storing the printer in places subject to rapid
changes in temperature and humidity. Keep it away from
direct sunlight, strong light, heat sources, or excessive
moisture or dust.
❏ Avoid places subject to shocks and vibrations.
❏ Place the printer near a wall outlet where you can easily
unplug the power cord.
Note for French-speaking users:
Placez l’imprimante près d’une prise de courant où la fiche peut
être débranchée facilement.
❏ Avoid electrical outlets controlled by wall switches or
automatic timers. An interruption in power can erase
information in the memory of your printer or computer.
Also avoid outlets on the same circuit as large motors or
other appliances that can cause voltage fluctuations.
❏ Keep the entire computer system away from potential
sources of electromagnetic interference, such as
loudspeakers or the base units of cordless telephones.
❏ Use a grounded power outlet; do not use an adapter plug.
❏ If you plan to use a printer stand, make sure it does not tilt
and is strong enough to hold the printer.
❏ Position the power cord and interface cable so they do not
interfere with paper feeding.