Filter
Top Products
1-12
Setting Up the Printer
L
R4C7930
shrimp.bk Rev.C
shrimpsetup.fm A5 size
11/26/01 Pass 1
Proof Sign-off:
ABE Y. Azuma A. Nagasawa
T. Takahashi
ABE S. Halvorson
2. Check the label on the back of the printer to make sure the
voltage required by the printer matches that of your
electrical outlet. Also make sure the shape of the plug on
your printer’s power cord matches the shape of your
electrical outlet.
c
Caution:
It is not possible to change the printer’s voltage. If the rated
voltage on the printer and your outlet voltage do not match,
contact your dealer for assistance. Do not plug in the power
cord.
3. Plug the appropriate end of the power cord into the AC inlet
on the back of the printer.
4. Plug the other end of the power cord into a properly
grounded electrical outlet.
Installing the Printer Software
After you connect the printer to your computer, you need to
install the software included in the EPSON printer software
CD-ROM shipped with your printer:
❏ Printer driver
The printer driver is the software that runs, or “drives,” your
printer. With it, you can select printer settings such as print
quality, resolution, and paper size.
❏ EPSON Status Monitor 3 (Windows Me, 98, 95, 2000 or
NT 4.0)
EPSON Status Monitor 3 notifies you of printer errors and
displays printer status information. See the Reference Guide
for more information on Status Monitor 3.
When you install the printer driver on Windows Me, 98, 95, 2000
or NT 4.0, the EPSON Status Monitor 3 utility will also be
installed. For information on using the software, see “Printer
Software” in the Reference Guide.