Filter
Top Products
3-10
Using the Control Panel
L
R4C7930
shrimp.bk Rev.C
shrimpcp.fm A5 size
11/26/01 Pass 1
Proof Sign-off:
ABE Y. Azuma A. Nagasawa
T. Takahashi
ABE S. Halvorson
Locking the Control Panel Buttons
You can restrict the use of buttons on the control panel using
Lock-out mode. In the default Lock-out mode, you can use only
the Pause, Load/Eject and Tear off buttons. If you want to
change which functions are locked, see “Changing the Lock-out
mode settings” below.
Turning Lock-out mode on and off
1. Make sure the printer is turned off.
2. Turn on the printer while holding down the Load/Eject and
Pause buttons. The printer beeps twice, indicating that the
Lock-out mode has been turned on.
When the Lock-out mode is on, the Pause and Paper Out lights
flash simultaneously three times when any locked button is
pushed.
To turn Lock-out mode off, repeat steps 1 and 2. The printer
beeps once, indicating that Lock-out mode has been turned off.
Changing the Lock-out mode settings
You can select which printer functions you want to be locked
while Lock-out mode is on (as described below). The following
table shows which functions you can lock and their default
settings (in Lock-out mode).
Function Default setting
Load Unlocked
Eject Unlocked
LF Locked
FF Locked
Tear Off Unlocked
Bin Locked