Filter
Top Products
3-4
Using the Control Panel
L
R4C7930
shrimp.bk Rev.C
shrimpcp.fm A5 size
11/26/01 Pass 1
Proof Sign-off:
ABE Y. Azuma A. Nagasawa
T. Takahashi
ABE S. Halvorson
About Your Printer’s Default Settings
The default settings control many printer functions. While you
can often set these functions through your software or printer
driver, you may sometimes need to change a default setting
from the printer’s control panel using the default-setting mode.
The following table shows the options available for each printer
setting. For instructions on changing the settings, see page 3-9.
Default-setting mode
Setting Options
Page length for front tractor Length in inches: 3, 3.5, 4, 5.5, 6, 7, 8, 8.5, 11,
70/6, 12, 14, 17
Page length for rear tractor Length in inches: 3, 3.5, 4, 5.5, 6, 7, 8, 8.5, 11,
70/6, 12, 14, 17
Skip over perforation Off, On
Auto tear-off Off, On
Auto tear off wait time* 0.5 second, 1 second, 2 seconds, Others
Auto line feed Off, On
Print direction Bi-D, Uni-D
Software ESC/P, IBM PPDS (same as IBM 2380 Plus),
OKI ML 320T*
0 slash 0,
0/
I/F (interface) mode Auto, Parallel, USB, Option
Auto I/F (interface) wait time 10 seconds, 30 seconds
Parallel I/F bidirectional mode** Off, On
Packet mode** Off, Auto
Character table Standard model: italic, PC 437, PC 850,
PC 860, PC 863, PC 865, PC 861, BRASCII,
Abicomp, Roman 8, ISO Latin 1, PC858,
ISO 8859-15
All other models: Italic, PC 437, PC 850,
PC 437 Greek, PC 853, PC855, PC 852,
PC 857, PC 866, PC 869, MAZOWIA,
Code MJK, ISO 8859-7, Bulgaria, PC 774,
Estonia, PC 866 LAT., ISO 8859-2, PC 866 UKR,
PC-APTEC, PC-771, PC-AR864, PC 708,
PC 720