Filter
Top Products
4-4
Troubleshooting
L
R4C7930
shrimp.bk Rev.C
shrimptroub.fm A5 size
11/26/01 Pass 1
Proof Sign-off:
ABE Y. Azuma A. Nagasawa
T. Takahashi
ABE S. Halvorson
Paper loading or feeding problems
The printer does not load single-sheet paper or does not feed
it properly.
Cause What to do
Continuous paper is in the
paper path.
Press the Load/Eject button to feed
the continuous paper back to the
standby position. Set the paper
release lever to the single-sheet
position and insert a new sheet. (See
“Switching to printing on single
sheets” on page 2-26 for more
information.)
The paper release lever is set
to a tractor position.
Set the paper release lever to the
single-sheet position.
The paper on the paper
guide is positioned too far to
the left or right for the
printer to detect that it is
there.
Move the paper (and the edge guides)
a little to the left or right.
Single-sheet paper is not
loaded properly.
See Chapter 2 or the Reference Guide
for instructions on loading
single-sheet paper.
The paper-thickness lever is
not set correctly.
Set the paper-thickness lever to match
the thickness of your paper. See
page 2-2 for instructions.
Paper is creased, old, too
thin, or too thick.
Use new, clean sheets of paper.