Filter
Top Products
Troubleshooting
4-5
R
R4C7930
shrimp.bk Rev.C
shrimptroub.fm A5 size
11/26/01 Pass 1
Proof Sign-off:
ABE Y. Azuma A. Nagasawa
T. Takahashi
ABE S. Halvorson
The printer does not fully eject a single sheet.
Cause What to do
Paper is too long. Press the Load/Eject button to eject
the sheet. Make sure the page length
of your paper is within the range
specified for single-sheet paper. Also
check and adjust the paper size
setting in your application or printer
driver.
The paper does not feed properly with the optional cut-sheet
feeder.
Cause What to do
The cut-sheet feeder is not
installed properly.
Reinstall it as described in the online
Reference Guide.
Too many sheets are loaded
in the cut-sheet feeder. You
cannot load more than 150
sheets of paper in the
high-capacity cut-sheet
feeder.
Load less than 150 sheets of paper.
See the online Reference Guide for
more information.
The edge guides of the
cut-sheet feeder are not
positioned correctly.
Align the left edge guide with the
arrow mark, then move the right edge
guide to match your paper’s width.
There is only one sheet left
in the bin.
Add more paper to the cut-sheet
feeder.