Filter
Top Products
2-8
Paper Handling
L
R4C7930
shrimp.bk Rev.C
shrimppaper.fm A5 size
11/26/01 Pass 1
Proof Sign-off:
ABE Y. Azuma A. Nagasawa
T. Takahashi
ABE S. Halvorson
8. Attach the paper guide and lay it flat on the printer. Open
the edge guides all the way to the left and right, then raise
the continuous paper support.
9. Turn on the printer. When the printer receives data, it
automatically loads the paper and starts printing.
If the first line on your page appears too high or low, change its
position with the Micro Adjust function. (See page 2-27.)
c
Caution:
Never use the knob to adjust the top-of-form position; this may
damage the printer or cause it to lose the top-of-form position.
Loading Continuous Paper with the
Pull Tractor
1. Close the front cover flap if paper is not loaded from the
front slot.