Filter
Top Products
2-12
Paper Handling
L
R4C7930
shrimp.bk Rev.C
shrimppaper.fm A5 size
11/26/01 Pass 1
Proof Sign-off:
ABE Y. Azuma A. Nagasawa
T. Takahashi
ABE S. Halvorson
13. Remove any slack in the paper by pressing the LF/FF button.
(Always remove any slack from the paper; otherwise print
quality may deteriorate.)
14. When the printer receives data, it will start printing at the
current position without advancing the paper. If necessary,
follow the steps in “Using the Micro Adjust Function” on
page 2-27 to adjust the current position of the paper.
c
Caution:
Never use the knob to adjust the top-of-form position;
turning the knob when the printer is on may damage it or
cause it to lose the top-of-form position.
15. Attach the printer cover by inserting the front tabs into the
slots on the printer, then lowering the cover into place.
16. Send a print job to the printer. The printer starts printing
from the top-of-form position. After you finish printing, tear
off the printed document at the perforation nearest the
paper exit slot.