Filter
Top Products
4-6
Troubleshooting
L
R4C7930
shrimp.bk Rev.C
shrimptroub.fm A5 size
11/26/01 Pass 1
Proof Sign-off:
ABE Y. Azuma A. Nagasawa
T. Takahashi
ABE S. Halvorson
The printer does not load continuous paper or does not feed it
properly.
Cause What to do
The paper release lever is
not set correctly.
Set the paper release lever to the
position for the paper source you
want to use. See “Setting the Paper
Release Lever” on page 2-1.
Single-sheet paper is in the
paper path.
Press the Load/Eject button to eject
the sheet.
Continuous paper is not
loaded properly.
See Chapter 2 or the online Reference
Guide for instructions on loading
continuous paper with the tractor you
want to use.
The paper-thickness lever is
not set correctly.
Set the paper-thickness lever to match
the thickness of your paper, as
described on page 2-2.
The printer does not feed continuous paper to the standby
position.
Cause What to do
You have not torn off the
printed pages before
pressing the Load/Eject
button.
Tear off the printed pages at the
perforation. Then press the
Load/Eject button to feed the paper
backward to the standby position.