Filter
Top Products
1-4
Setting Up the Printer
L
R4C7930
shrimp.bk Rev.C
shrimpsetup.fm A5 size
11/26/01 Pass 1
Proof Sign-off:
ABE Y. Azuma A. Nagasawa
T. Takahashi
ABE S. Halvorson
3. Press the tabs on each side of the paper tension unit as
shown, then lift the front of the unit and pull it up and out of
the printer.
4. Make sure the print head is not hot; if it is, let it cool for a
few minutes before touching it. Then slide the print head to
the middle of the printer by hand.
c
Caution:
Never move the print head while the printer is turned on;
this can damage the printer.
5. If a used ribbon cartridge is installed, grasp the cartridge by
the handle and pull it up and out of the printer.