Filter
Top Products
4-8
Troubleshooting
L
R4C7930
shrimp.bk Rev.C
shrimptroub.fm A5 size
11/26/01 Pass 1
Proof Sign-off:
ABE Y. Azuma A. Nagasawa
T. Takahashi
ABE S. Halvorson
c
Caution:
Never use the knob to adjust the top-of-form position; this may damage
the printer or cause it to lose the top-of-form position.
Wrong tear-off position
c
Caution:
Never use the knob to adjust the tear-off position; this may damage the
printer or cause it to lose the tear-off position.
The printer prints on (or too far away from) the perforation of
your continuous paper.
Cause What to do
The tear-off position setting
is incorrect.
Adjust the tear-off position using the
Micro Adjust function. See
“Adjusting the tear-off position” on
page 2-27.
You moved the paper using
the knob while the printer
was on.
Adjust the tear-off position using the
Micro Adjust function. See
“Adjusting the tear-off position” on
page 2-27.
The printer you want to use
is not selected in your
software.
Choose the correct printer from the
Windows desktop or in your
application before printing.
The paper size setting in
your application or printer
driver does not match the
size of the paper you are
using.
Check the paper size setting in your
application or printer driver.
The printer’s page length
settings for the front or rear
tractor do not match the size
of the paper you are using.
Check the page length settings for the
front or rear tractor using the printer’s
default-setting mode. See “About
Your Printer’s Default Settings” on
page 3-4.