Filter
Top Products
Setting Up the Printer
1-3
R
R4C7930
shrimp.bk Rev.C
shrimpsetup.fm A5 size
11/26/01 Pass 1
Proof Sign-off:
ABE Y. Azuma A. Nagasawa
T. Takahashi
ABE S. Halvorson
Installing the Ribbon Cartridge
EPSON recommends the use of genuine EPSON ribbon
cartridges (#8750 for the FX-880+, #8755 for the FX-1180+).
Products not manufactured by EPSON may cause damage to
your printer that is not covered by EPSON’s warranties.
w
Warning:
You need to move the print head by hand to install the ribbon
cartridge. If you have just used the printer, the print head may
be hot; let it cool for a few minutes before touching it.
1. Make sure the printer is turned off. If it is connected to an
electrical outlet, unplug it from the outlet.
2. Open the printer cover, then pull it up to remove it.
The printer is off when the
power switch is pressed
down to the N side.