Falcon B-300 Printer User Manual


 
Using the Control Panel 109
Head alignment
You can print a head alignment test pattern. From the printing results, you can adjust the
head alignment.
Cleaning
You can clean the print head. You can also print a nozzle check pattern before cleaning.
Cleaning sheet
You can clean up the rollers inside the printer.
Contrast adj.
You can adjust the contrast of the LCD screen. Press the u Up or d Down button to adjust
contrast.
Network Setting Menu
This menu allows you to make network settings.
Network setup
You can select the method to configure the network settings.
When Auto is selected, the printer obtains the IP address, Subnet mask and Default
gateway automatically. When Panel is selected, you can specify the IP address, Subnet
mask, and Default gateway settings using the control panel. When Init N/W set is selected,
you can revert the network settings of the printer to the factory default value.
IP address, Subnet mask, Default gateway
You can set the IP address, Subnet Mask, and Default Gateway to the printer. To change
the parameter, press the l Left or r Right button to move cursor and the u Up or d Down
button to change number.
Item Parameter
Network setup Auto -
Panel IP address 000.000.000.000–255.255.255.255
Subnet mask 000.000.000.000–255.255.255.255
Default gateway 000.000.000.000–255.255.255.255
Init N/W set -