Falcon B-300 Printer User Manual


 
Using the Printer on a Network 153
12.Select each item to install.
Note:
EpsonNet Print is already installed; you don’t need to select it.
13.When you’re done, remove the CD and restart the computer.
Repeat these steps for every computer on the network that will print to the B-500DN.
Note:
To find the supported OS versions for the printer, see the following section.
& See “Operating System Versions” on page 197.
To find the bundled utilities, see the CD-ROM shipped with your printer.
To get more information, see the Network Guide on the CD-ROM shipped with your printer.
Setting Up the Printer as a Shared Printer for Windows
(B-300/B-500DN)
These instructions tell you how to set up your printer so users on the network can share it.
First you will set up the printer as a shared printer on the computer directly connected to it
with a USB cable. This computer is the print server, and must stay powered on for the
printer to be available to any computers on the network. Then you will add the printer to
each network computer that will access it. Each computer is the print server’s client.
Note:
These instructions are for small networks only. To share the printer on a large network, consult
your network administrator.