Using the Control Panel 110
Status and Error Messages
This section describes the meaning of messages displayed on the LCD screen.
The table below describes the status messages.
The table below contains error messages, a brief description of each message and
suggestions for correcting the problem.
Message Description
Cancel The print job is canceled.
Charging ink The printer is charging the ink.
Cleaning The printer is cleaning the print head.
Please wait The printer is starting.
The printer is initializing the settings.
Printing The printer is processing data.
Ready The printer is ready to print.
Power save The printer is in the power save mode.
Power off The printer is shutting down.
Message Problem Solutions
Service call see guide Service call error occurs. Turn off the printer and then back
on. If the error does not clear,
contact Epson.
& See “Where To Get Help” on
page 182.
Printer near end of
service life
Parts inside the printer are at the
end of their service life.
Contact Epson to replace the
parts.
& See “Where To Get Help” on
page 182.
Nozzle maint error see
guide
Print head nozzles are clogged or
misaligned.
Perform a nozzle check and print
head cleaning.
& See “Checking the Print Head
Nozzles” on page 137.
& See “Cleaning the Print Head”
on page 139.
Press the OK button to recover
from error status.