Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.6)
2-10
Printer Components: Front Cover to USB Port
Components Description
Front Cover Opens to allow access to the Ribbon Cartridge. (Note: This cover must
be closed in order for the Printer to begin printing.)
Printhead The component of the Printer that actually does the printing. (Note: This
component is fragile and must not be bumped or touched with anything
other than a cleaning swab.)
Cancel button The Cancel button turns the Printer ON and OFF. (Note: It also
serves to cancel the current print job and reset the Printer for the next
print job.)
If a card is left within the Printer after a print job is canceled, it will
automatically be ejected when the Printer is turned back ON.
Pause button The Pause button is used to pause the Printer during normal operation
and also to resume operation after an error condition is cleared. (Note:
In general, as the icon above this button indicates, errors are related to
either the Ribbon or the cards. If an error occurs, the Pause LED will
flash.)
Card
Cleaning
Roller
Automatically cleans cards for higher print quality. (Note: Clean the
Card Cleaning Roller during every Ribbon change, as needed.)
Card Input
Hopper
Load blank cards into this Hopper.
Flipper Cover Opens to allow access to the Card Flipper.
E-Card Ports Connects to the Printer’s E-Card Stations.
Power Port Connect to the included power cord.
USB Port Connect to a Windows PC with a USB cable.