Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.6) 15-1
Section 15: Index
A
About button, 6-9
AC - Alternating Current, 15-1
Accepted Card Thickness, 2-3
Accepted Card Types, 2-3
Accepted Standard Card Sizes, 2-3
Access Card, 15-1
Adhesion, 15-1
Adjusting the Image Darkness, 4-43, 4-45
Agency Listings, 2-2, 2-3
Algebraic, 6-13, 15-1
ANSI (American National Standards Institute), 15-1
AS400, 15-1
ASCII (American Standard Code for Information
Interchange), 15-1
ASCII Code, 6-43
ASCII Offset, 6-38
AT, 15-1
automated Flipping Module, 2-16
B
B (Black), 15-1
Barcodes, 15-2
Batch print, 15-2
Battery Back-up, 15-2
Bi-directional, 15-2
BIOS (Basic Input/Output System), 15-2
Bit, 15-2
Bit Density, 6-35
Bit map, 15-2
blocked Sensor, 4-32
Board, 15-2
Boot-up, 15-2
Buffer, 15-2
C
Cable, 15-2
Cache, 15-3
Calibrate tab, 4-35, 4-49, 6-25
Calibrating, 15-3
Cancel button, 2-10
Card Cleaning Roller, 2-10
Card Design, 2-15
Card Feeding Errors, 4-9, 4-11, 4-14, 4-15, 4-17, 4-19,
4-21, 4-24, 4-26, 4-28, 4-30, 4-32
card grid, 6-54
card grid area, 6-53
card grid lines, 6-55
card input, 6-88
Card Input Hopper, 2-10
Card Input Hopper Capacity, 2-3
card orientation, 6-56
card output, 6-88
Card Size, 2-15
card stock scratches, 4-40
Card Surface, 2-15
cards look pixilated or grainy, 4-52
card's Magnetic Stripe/smart chip, 6-19
CD (Compact Disc), 15-3
Centronics, 15-3
Character, 6-43
Character ASCII Offset, 6-38
Character Parity, 6-39
Character Size radio buttons, 6-36
Cleaning Card Feed/Cleaning Rollers, 7-4
Cleaning Cards, 7-2
Cleaning Inside Printer, 4-41
Cleaning Pad, 7-5
Cleaning Pads, 7-2
Cleaning Printer's Interior, 7-5
Cleaning Roller, 15-3
Cleaning the Printhead, 4-40
Clear Protective Overlay Panel, 2-11
Coercivity, 15-3
Color matching, 15-3
Color Matching, 6-13
Color Matching software, 6-13
Colored Resin, 2-12
Colors, 2-3
Communication Errors, 4-3, 4-4
Compressed air, 15-3
Contrast, 15-3
Contrast / Gamma, printed image, 6-21
Control panel, 15-3
CR-100, 15-4
CR-79, 15-4
CR-80, 15-4
CR-80 card size, front/back, 6-72, 6-73, 6-74
CR-90, 15-4
CSA, 2-1
Cursor, 15-4
customized ID software applications, 6-42
D
Darkness, 15-4
Data Cables, 4-35
DB-9, 15-4
DC (Direct Current), 15-4
DC Motor, 15-4
Default, 15-4
Default button, 6-24, 6-31, 6-32
default ISO Standard selections, 6-35, 6-39
default location, 6-76
defined area, 6-56
Defined Area arrows, 6-57
Defined area(s), 6-75
Defined Area(s) check box, 6-75, 6-76, 6-77, 6-81, 6-82,
6-84, 6-85, 6-90, 6-92, 6-93, 6-96
Defined Area(s) option, 6-49, 6-54, 6-73
Defined/undefined area(s), 6-72, 6-74
Defrag, 15-4