Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.6)
4-10
Resolving a Ribbon RFID Error (Ribbon RFID Antenna is Corrupted)
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
• Symptom: Printer RFID Sensor does not detect a recognizable signal from
the Ribbon.
• Printer Error State: The Ribbon tag information is corrupted or incorrect.
• LCD Error Display: Ribbon RFID Error
• Driver Monitor Error Display: Ribbon RFID Error