Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.6) 15-3
inches or mm option, 6-2
incorrect image darkness problems, 4-43
increase Printhead heat, 6-87
Input, 15-10
Input Hopper, 15-10
integral resistor, 7-2
Interface, 2-4
Intermediate Transfer Media (InTM), 15-10
internal electrical components, 7-2
internal Printer settings, 6-25
ISO, 15-10
ISO 7811-2 Magnetic Stripe, 6-41
ISO encoded data format, 6-34
ISO Standard selections, 6-39
ISO Standard settings, 6-32
ISO Track Locations, 6-41
J
JIS II (Japanese Industrial Standard), 15-10
K
K Panel, 15-10
K Panel Resin options, 6-57, 6-81
K Panel Resin tab, 6-71
L
Lamination, 15-10
Lamination Drive, 9-2
Lamination Drive Stepper, 9-2
Lamination Roller Lift, 9-2
Lamination Sensor Calibration, 4-53
LAN (Local Area Network), 15-10
Landscape, 15-11
Landscape orientation, 6-26
LCD (Liquid Crystal Display), 15-11
LED (Light Emitting Diode), 15-11
less heat / more heat, 6-22, 6-23
LoCo (Low Coercivity), 15-11
LPT Port (Line Printer Port), 15-11
LRC Generation, 6-39
LRC Generation Mode, 6-39
M
magnetic data, 6-94
Magnetic Encoder, 4-17
Magnetic encoding, 15-11
Magnetic Offset option, 6-94
Magnetic Offset value, 6-94
Magnetic stripe, 15-11
Magnetic Stripe Encoding Module, 6-30
Magnetic Stripe reader, 4-14
Magnetic Track, 15-11
Magnetic Track Options, 6-31, 6-32
Magnetic Track Selection, 6-31, 6-32, 6-33
Magnetic Track Selection option, 6-32
Magnetic Verify, 15-11
maximum adjustment range, 6-89, 6-94
MB (Megabyte), 15-12
Media, 15-11
Memory, 2-4, 15-12
Menu, 15-12
Metallic Resin, 2-12
Monitor, 6-13
Monochrome, 15-12
Monochrome Dye-Sub (B), 4-53
Monochrome Resin (K), 4-53
Motor Voltages (when active), 9-2
Multi-Language Extension (MLE), 6-37
N
Network, 15-12
None, 6-13
O
Oersted (Oe), 15-12
Offset, 15-12
Omit Signature Area setting, 6-54
On LED, 4-53, 4-54
onscreen card design, 6-77
Operating Temperature, 2-4
optional Magnetic Stripe Encoding Module, 6-30
O-Ring, 15-12
OS (Operating System), 15-12
Output, 15-12
Output Hopper, 15-12
Overlaminate, 15-13
Overlay, 15-12
Overlay / Print Area, 6-54, 6-55
Overlay / Print Area options, 6-51
Overlay / Print Area tab, 6-45
Oversized Cards, 15-13
P
Parallel, 15-13
Parallel port, 15-13
Pause button and LED, 2-10
Pause/Resume button, 4-53, 4-54
PC (Personal Computer), 15-13
PCB (Printed Circuit Board), 15-13
Peel, 15-13
Peel-Off, 15-13
Peripheral, 15-13
PET, 15-14
Photo, 6-14
Pinch Roller, 15-14
Pixel, 15-14
Platen, 15-14
PolyGuard Overlaminate, 15-14
poor image quality problems, 4-50, 4-51
Port, 15-14
Portrait, 15-14
Portrait or Landscape, 6-3
Portrait, Landscape, or Rotate 180 Degrees, 6-26
positive / negative Print Length value, 6-89
POSITIVE / NEGATIVE value., 6-88
Potentiometer, 15-14