Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
18-1
Section 18: Index
A
About button, 8-21
absolute failure, 8-7
AC - Alternating Current, 17-1
accelerated wear/dye migration, 8-5
Accepted Card Compositions, 8-3, 8-13
Accepted Card Thickness, 2-7
Accepted Card Types or Compositions, 2-7
Add button – K Panel, 8-93
adhesion, 8-7
Adhesion, 17-1
adhesives, 8-2
Adjust Image Position controls, 8-53
Agency Listings, 2-5
Algebraic, 17-1
ANSI (American National Standards Institute), 17-1
Appropriate HDP Printer Driver Settings, 8-3
ASCII (American Standard Code for Information
Interchange), 17-1
AT, 17-1
B
B (Black), 17-1
Barcodes, 17-2
Baseplate (D860060), 4-4
batch print, 17-2
Battery Back-up, 17-2
Bi-directional, 17-2
BIOS (Basic Input/Output System), 17-2
Bit, 17-2
Bit map, 17-2
black graphics, 8-94
black text or barcodes, 8-94
Board, 17-2
Boot-up, 17-2
Buffer, 17-2
C
Cable, 17-2
Cache, 17-3
Calibrating, 17-3
Cancel button, 2-19
Card Capacity, 2-7
Card Cleaning Assembly, 2-17
Card Count, 5-42
Card Design, 2-21
card grid, 8-97
Card Illustration, 8-53
Card Input Guide adjustment, 8-8, 8-9, 8-10
Card Input Hopper, 2-17,
2-23
Card Output Hopper, 2-17
Card Size, 2-21, 8-12
card stock selection, 8-2
Card Surface, 2-21
Card Type, 8-13, 8-15
Card Type, 2-7
Card Type Custom options, 8-58
Card Type option, 8-4, 8-55
Card Type Selection, 8-3
card warping, 8-13
card's Magnetic Stripe/smart chip, 8-35
CD (Compact Disc), 17-3
Centronics, 17-3
Clean inside Printer, 10-5
Clean outside of Printer, 10-5
Cleaning Cartridge, 10-7
Cleaning Roller, 10-7, 17-3
Cleaning Tape loop, 10-7
Clear Protective Overlay Panel, 2-20
Coercivity, 17-3
Coercivity option, 8-66
Color Bars YMC, 5-43
color matching, 17-3
color matching algorithm, 8-40
Color Matching dropdown, 8-40
color matching software, 8-40
colors, 2-7
Communication Errors, 5-37, 5-38
Compressed air, 17-3
Contrast, 17-3
Contrast/Gamma, 8-41
Control panel, 17-3
Copies, 8-18
copyright/version information, 8-21
CR-100, 17-4
CR-79, 17-4
CR-80, 17-4
CR-80, CR-90 and CR-100, 8-12
CR-90, 17-4
CSA, 2-5
Cursor, 17-4
Custom 1/Custom 2 options, 8-4
custom Image Transfer settings., 8-4
Custom options, 8-15
customization options, 8-69
D
Darkness, 17-4
DB-9, 17-4
DC (Direct Current), 17-4
DC Motor, 17-4
Default, 17-4
Default button, 8-43
Defined Area(s) check box, 8-97
Defined Area(s) option, 8-95
Defrag, 17-4
Delete button – K Panel, 8-93
DIP switches (Dual In-line Package Switches), 17-4
Direct-to-Card (DTC) Printing, 17-5
direct-to-card printing, 8-2
disable printing, 8-36
disk cleanup utility, 5-38