FARGO electronic Pro-LX Laminating Card Printer/Encoder Printer User Manual


 
RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 113
Using Image Position controls
Use the Image Position controls to adjust the position of the overall print area to be
precisely centered on a card.
Step Procedure
1
Click on the Vertical and Horizontal adjustment arrows to adjust the Image
Position values.
When adjusting these values, keep in mind that cards always remain in the
same position while moving through the Printer, regardless of image
orientation.
To illustrate this, the card illustration shown in the Image Position box will flip
and rotate according to the Portrait, Landscape or Rotate 180 Degrees
selection.
The outline around the illustration will always remain in the same Landscape
orientation.