FARGO electronic Pro-LX Laminating Card Printer/Encoder Printer User Manual


 
RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 192
Cleaning the Printers Exterior
The Printer has a durable casing that should retain its luster and appearance for many years.
Steps Procedures
1 Clean it only with a Cleaning Pad from the Printer Cleaning Kit.
Caution: Do not use cleaning solvents of any kind or spray the
cabinet with a cleaner.
Cleaning the Printers Interior
The Printer may generate dust and other particles inside the Printer. These particles are
attracted to the Print Ribbon or blank card by static produced during printing and can
contaminate the printed card causing spots or speckles to appear.
Periodically, use the following procedure to remove dust and other contaminants:
Steps Procedures
1 Open the Printer's Top Covers.
2 Remove the Print Ribbon and overlaminate from the Printer.
3
Use a Cleaning Pad from the Printer Cleaning Kit to wipe out all visible areas
inside the Printer. Remove any debris that may be inside.
Caution: Be extremely careful not to let any alcohol drip inside the
Printer.
4 Re-install the printing supplies and close the Printer.