Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 38
Reviewing the Top Line LCD Messages (continued)
Message Cause
Key Card Deleted Indicates the data on the SmartGuard Access Card was successfully
deleted. Appears only when using the SmartGuard Security Feature.
See the SmartGuard User’s Guide for more information.
Lam Error/Out
Error Message
Indicates a Lam Error/Out Error Message. See Resolving the Lam
Error/Out Error Message procedure in Section 2, page 57.
Low Ribbon/Clean Indicates the Print Ribbon will soon run out and that the Printer
should be cleaned.
Mag Encoding Indicates the Mag Stripe is being encoded.
Mag Verify Error The Mag Stripe was not encoded properly. See Resolving Mag
Verify Error Message Section 2, page 69.
Mag Verifying Indicates data on Mag Stripe is being verified.
No Shield Loaded Attempts are made to print with the Printer Driver's SmartShield
option selected (even though the optional SmartGuard Security
Feature is not used).
OR
If using the SmartGuard feature, the SmartShield image is not
encoded onto the SmartGuard Access Card (currently inserted into
the Printer).
See the SmartGuard User’s Guide for more information.
Print Cover Open Indicates that the top-right cover is not properly shut. If this appears
in error, see the Resolving Cover Open Error Message procedure in
Section 2, page 50.
Printer Ready Indicates the Printer is ready to print.
Printing Indicates the Printer is printing.
Continued on the next page