FARGO electronic Pro-LX Laminating Card Printer/Encoder Printer User Manual


 
RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 40
Reviewing the Top Line LCD Messages (continued)
Message Cause
Smart Card Error Unable to encode smart card.
Smart Card Good Indicates smart card was successfully encoded.
Smart Encoding Indicates the Printer is writing or encoding data onto the SmartGuard
Access Card. Appears only when using the SmartGuard Security
Feature. See the SmartGuard Users Guide for more information.
Writing Key Data Indicates the Printer is writing or encoding data onto the SmartGuard
Access Card. Appears only when using the SmartGuard Security
Feature. See the SmartGuard Users Guide for more information.
Wrong Ribbon
Error
The wrong Print Ribbon is installed. See the Resolving the Wrong
Ribbon error (being displayed incorrectly) procedure in Section 2,
page 62.
Reviewing the Bottom Line LCD Error / Status Messages
Message Cause
Card Jam: Lam
Error
A card is jammed somewhere along the laminating path, under the
Printer's Lamination Top Cover. See the Resolving the Card Jam:
Lam Error procedure in Section 2, page 55.
Clearing Jam Indicates error or jam is being cleared. See Card Jam Errors in
Section 2, page 53.
Lam Calib Failed An attempt at calibrating the Lamination Sensor through the Printer
Driver has failed. See the Resolving the Lam Error/Out Error
Message procedure in Section 2, page 57.
Lam Cover Open The Lamination Top Cover is not properly shut. If this appears in
error, see the Resolving Cover Open Errors procedure in Section 2,
page 50.
Continued on the next page