FARGO electronic Pro-LX Laminating Card Printer/Encoder Printer User Manual


 
RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 39
Reviewing the Top Line LCD Messages (continued)
Message Cause
Rasterize Shield Indicates the Printer is loading the SmartShield security image from
the SmartGuard Access Card into its memory. Appears when a valid
access card containing a SmartShield image is first inserted into the
Printer.
(Note: If SmartShield image is named, the name will also appear
along with this message on the bottom line of the LCD Display.
Appears only when using the SmartGuard Security Feature.)
See the SmartGuard Users Guide for more information.
Reading Key Data Indicates the Printer is reading the data from the SmartGuard
Access Card. Appears when a valid access card is first inserted into
the Printer. Appears only when using the SmartGuard Security
Feature.
See the SmartGuard Users Guide for more information.
Rib Calib Failed
Error
Indicates that an attempt at calibrating the Ribbon Sensor through
the Printer Driver has failed. See the Resolving the Skipping Ribbon
Panel issues procedures in Section 2, page 59.
Ribbon Error/Out
Error
Indicates either the Print Ribbon is out or a ribbon error has
occurred. See Resolving Ribbon Low Error Message procedure in
Section 2, page 63.
Ribbon Jam/Out
Error
The Print Ribbon has become jammed in the Printer Rollers, it is
stuck to the surface of the card or it is out. See the Resolving the
Ribbon Breaking issues procedure in Section 2, page 64.
Ribbon Low Error
Message
Indicates either the ribbon is running low or is out. See Resolving
Ribbon Low Error Message procedure in Section 2, page 63.
Sensor Calibrate Indicates the Ribbon Sensor is calibrating. See the Resolving the
Skipping Ribbon Panel issues procedures in Section 2, page 59.
Continued on the next page