Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 182
Selecting the Pause for Low Ribbon checkbox
Use this option to generate a definitive warning when the Print Ribbon is running low. (Note:
When this option is selected, the Printer will "beep", pause and the Ready LED will flash
when approximately 10 to 20 prints remain on the Print Ribbon.)
Step Procedure
1
Replace the ribbon and press the Pause/Resume button to continue printing
with a new ribbon.\
OR
Leave the existing ribbon in the Printer and press the Pause/Resume button.
Once the Pause/Resume button is pressed, the Printer will continue
printing until the end of the ribbon, but will beep once before each print job.
It will not be necessary to press the Pause/Resume button again to
continue printing once it has been pressed initially during a batch print.)
The Printer will still beep once before each print job when approximately 10
to 20 prints remain on the Print Ribbon; however, the Printer will not pause.
Instead, it will continue printing until the end of the ribbon, without User
intervention.