FARGO electronic Pro-LX Laminating Card Printer/Encoder Printer User Manual


 
RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 17
Technical Specifications (continued)
Term Description
Overlaminate
Options
Thermal Transfer Overlaminate, .25 mil thick, 500 prints
PolyGuard Overlaminate, .6 mil thick, 250 prints
PolyGuard Overlaminate, 1.0 mil thick, 125 prints
All overlaminates available in either clear, holographic globe design or
custom holographic design; can also be optimized for use with smart
cards and Magnetic Stripes
Printing Method Dye Sublimation/Resin Thermal Printer
Printing
Resolution
300 dpi (11.8 dots/mm).
Print Speed-
Batch Mode
8 seconds per card / 450 cards per hour (K)*
15 seconds per card / 240 cards per hour (BO)*
30 seconds per card / 120 cards per hour (YMCKO)*
30 seconds per card / 120 cards per hour (YMCK/lamination)
37 seconds per card / 97 cards per hour (YMCKK/lamination)
Print speed indicates an approximate batch print speed and is
measured from the time a card feeds into the Printer to the time it
ejects from the Printer.
Print speeds do not include the time needed for the PC to process the
image.
Process time is dependent on the size of the file, the CPU, amount of
RAM and the amount of available resources at the time of the print.
(Note: The single card print speeds will be slower than the batch print
speeds listed above since batch print speed is enhanced by the
Printer's multi-tasking capabilities when printing multiple cards in
succession.)