Filter
Top Products
92
6.1 Clearing Donor/Receiver Jams
● If the donor or receiver fails to be properly transported during printing, the machine stops and
the following indications are made.
●
The operation panel indicates a donor/receiver jam has occurred.
●
A number or letter blinks in the monitor to indicate the location of the donor/receiver jam.
●
The alarm sounds (four successive short beeps, repeated). (To stop the alarm, open the
door.) No alarm sounds if "Alarm OFF" is selected in the "Configuration" menu.
● Clear the donor/receiver jam, by doing follow the procedures given in Sections 6.2 to 6.10.
Left-hand Upper
Door
Guide
Guide
Front Door (upper)
Receiver
Magazine
Thermal
Processing Unit
Left-hand Lower Door
Front Door (lower)
Guide
Guide
Guide
J6
J2
J10 J9
J5
J4
J3
J1
J7
J11
J12
J8
Magazine
R
Magazine
D
Right-hand Upper Door