FujiFilm 4500N Printer User Manual


 
46
4.1 Menu
Size – A3W
+
StandBy – 30min
+
Dot/Inch – 400
+
Alarm – ON
+
Margin Control
DISP.LANG. – ENG
+
Border 3 mm
Precaution Setup
Counter – Enable
+
Donor Count – 130
+
Paper Count – 130
+
Filter Count – 130
+
Selects the paper size.
Selects the time required for
the machine to enter power
saving mode.
Selects the resolution (dpi).
Selects buzzer ON/OFF.
Selects the language :
Japanese or English.
Selects bordered or borderless.
Sets the level used to issue alarms.
Sets whether the donor
counter is used or not.
Sets whether the receiver
counter is used or not.
Sets whether the water filter
counter is used or not.
X – 0
+
mm
Y – 0
+
mm
Adjusts the margin width in
the X direction.
Adjusts the margin width in
the Y direction.
Donor Alarm – 10
+
Filter Alarm – 10
+
Sets the number of prints at
which the donor alarm sounds.
Set the number of prints at which
a water filter alarm sounds.
Paper Alarm – 10
+
Set the number of prints at which
the receiver alarm sounds.
1) PrintReference
2) MeasureDensity
Creates calibration patterns.
Performs a density measurement.
Configuration
Calibration
*3
*3
*2
Bordered
*3 This mark is displayed only
when "Enable/Disable" is set
to "Enable". The user can
move lower level menus.
*2 This mark is displayed only
when "Bordered/Borderless" is
set to "Bordered". The user can
move to lower level menus.
"Borderless" is not available for
A3-wide and A4-wide sheets.
+
+
[ ]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[ ]
[
]
[
]
[
]
[
]
[
]
[
]
[ ]
[
]
[
]
[
]
[
]
[
]
[
]