Filter
Top Products
53
4
HOW TO USE THE OPERATION PANEL
To adjust the position of a print image, follow the procedure below.
NOTE: ● The X and Y directions with respect to the print output direction are indicated below.
X: X decreases by pressing the – key.
X increases by pressing the + key.
Y: Y decreases by pressing the – key.
Y increases by pressing the + key.
4.7 Fine Adjustment of Print Image Position
1
.
Press the ONLINE key on the operation panel to switch
the machine to OFFLINE condition.
2
.
When the machine is in OFFLINE mode, press the NEXT
key twice.
★ The message changes to "Configuration".
3
.
Press the SEL key.
★ The message changes to "Size".
4
.
Press the NEXT key four times.
★ The message changes to "Margin Control".
■ To change the margin width in the X direction
1
.
Press the SEL key.
★ The message changes to "X mm".
X
Y
Print Output
Direction
Image Area
Configuration
ESC
PREV
SEL
NEXT
Size
ESC
PREV
SEL
NEXT
[ ]
DP
+
[ ]
–
Margin Control
ESC
PREV
SEL
NEXT
X
ESC
PREV
SEL
NEXT
[ ]
0mm
+
[ ]
–