Filter
Top Products
47
4
HOW TO USE THE OPERATION PANEL
4.1 Menu
Inputs passwords used for settings.
Network Setting
*4
*6
*5
*5
*5
*4
*5
*6
This mark is displayed only when password is set.
When DHCP/BOOTP or RARP and APIPA are enabled, this can only be displayed, not set.
When a value of "Network Setting" is changed, make sure to turn the power of this machine
OFF, then ON, after the change.
Password
0000
[
]
[
]
–
+
Selects Enable/Disable for TCP/IP
protocol.
TCP/IP
Enable
[
]
[
]
–
+
Selects Enable/Disable for password
when performing various settings on
the network.
Sets password used for network
settings.
Displays MAC address for this machine.
Setting can be changed to the one whereby
degradation of communication speed due to
"packet lost" in network communication can
be avoided.
Setting values will be "10M HALF", "10M FULL",
"100M HALF" or "100M FULL".
Selects Enable/Disable for AppleTalk.
Selects Enable/Disable for
DHCP/BOOTP.
DHCP/BOOTP
Disable
[
]
[
]
–
+
Selects Enable/Disable for RARP.
RARP Disable
[
]
[
]
–
+
Selects Enable/Disable for APIPA.
APIPA Disable
[
]
[
]
–
+
IP Address
XXX.XXX.XXX.XXX
[
]
[
]
–
+
Subnet Mask
XXX.XXX.XXX.XXX
[
]
[
]
–
+
Default Gateway
XXX.XXX.XXX.XXX
[
]
[
]
–
+
Inputs default gateway of this
machine when DHCP/BOOTP,
RARP and APIPA are disabled.
Displays default gateway assigned
when they are enabled.
Inputs the IP address of this
machine when DHCP/BOOTP,
RARP and APIPA are disabled.
Displays the IP address assigned
when they are enabled.
Inputs subnet mask of this
machine when DHCP/BOOTP,
RARP and APIPA are disabled.
Displays subnet mask assigned
when they are enabled.
Password Enable
[
]
[
]
–
+
MAC Address
00:C0:2D:20:XX:XX:XX
AppleTalk Enable
[
]
[
]
–
+
Mode AUTO
[
]
[
]
–
+
Password 0000
[
]
[
]
–
+