FujiFilm 4500N Printer User Manual


 
6
1.4 Electrical Hookup
Connect the power plug directly into a 120V ±10V, 60 Hz grounded outlet (3-pin) which has a
power rating of 15 A or more.
WARNING: DO NOT USE a two-pin power outlet which is not grounded, as an electrical
shock may result when short circuiting occurs.
Use the indicated power supply voltage only. Never use an extension cord
with an inadequate rating. If such a cord is used, abnormal heat generation,
smoke or other abnormal phenomena may occur.
Perform the following checks on a periodic basis.
Make sure the power plug is properly inserted into a dedicated power outlet.
Check the power plug and cable for abnormal heat generation.
Make sure the power cable is not cracked or damaged.