Filter
Top Products
34
7
.
Hold the leading edge of the receiver and slowly insert the
receiver magazine along the guide.
NOTE: Push the receiver magazine all the way.
8
.
Close the front upper door.
★ The message changes to "Self Check" and the machine
starts the self check.
★ When the self-check is completed, the message
changes to "Data Ready".
★ The machine automatically cuts and discharges the
unnecessary portion of the donor leading edge.
IMPORTANT:
● During the cutting of the leading edge, LED lamps 1 to
10 on the transfer monitor come on sequentially. At this
time, do not open any door. If you do, donor/receiver
jamming may occur.
● During the cutting of the leading edge, do not turn the
power switch to OFF (
) or unplug the power cable.
If you do, donor/receiver jamming may occur.
3.5 Receiver Magazine Replacement
Guide
SelfCheck
LL/DP-W GLOSSY THICK
Data Ready400
LL/DP-W GLOSSY THICK