Filter
Top Products
28
NOTE: Be sure to replace the donor magazine with the power switch ON
( ).
If the power switch is OFF (
), the machine will not detect the
replacement. The D LED lamp on the transfer monitor comes on
the next time the power switch is turned to ON ( ). The trailing
edge discharge (explained later) may not be performed.
1
.
Make sure that LED lamps 1 to 10 on the transfer monitor
are off, and then open the front lower door.
IMPORTANT:
If any door is opened if any of the LED lamps 1 to 10 on
the transfer monitor is on, donor/receiver jamming occurs.
2
.
Rotate the inner door lock lever 90 degrees to open the
inner door.
3
.
Pull the donor magazine straight out.
4
.
Place the donor magazine as shown in the illustration.
5
.
Unlock both sides of the donor magazine and open the
cover.
3.4 Donor Magazine Replacement
Front Lower
Door
Inner Door Lock
Lever
Inner Door
Donor Magazine