FujiFilm 4500N Printer User Manual


 
31
3
OPERATING PROCDURES
14.
Grasp the donor's leading end and slowly insert the donor
magazine along the guide.
NOTE: Push the donor magazine all the way in.
15.
Close the inner door and rotate the inner door lock lever 90
degrees clockwise.
16.
Close the front lower door.
When the self-check is completed, the message changes
to "Data Ready".
IMPORTANT:
During the cutting of the leading edge, LED lamps 1 to
10 on the transfer monitor come on sequentially. At this
time, do not open any door. If you do, donor/receiver
jamming may occur.
During the cutting of the leading edge, do not turn the
power switch to OFF (
) or unplug the power cable. If
you do, donor/receiver jamming may occur.
3.4 Donor Magazine Replacement
Guide
Inner Door Lock Lever
Inner Door
Data Ready400
LL/DP-W GLOSSY THICK