Filter
Top Products
71
4
HOW TO USE THE OPERATION PANEL
15.
Press the NEXT key.
★ Screen for communication mode setting will be displayed.
While the machine will be used under "AUTO" setting
normally, change the setting when the communication
speed is lowered due to the reason of packet lost.
16.
Press the NEXT key.
★ Screen for setting the password opens. When the
password is to be enabled, select "Enable" using the - or
+ key and when it is to be disabled, select "Disable". If it
is enabled, go to Procedure 16, and if disabled, go to
Procedure 17.
17.
Press the SEL key.
★ Screen for setting numeric figure of the password opens.
Move four figures to be changed using the SEL key and
change numeric figures using the - or + key. (Numeric
figures from 0 ~ 9 can be used).
18.
After pressing the ONLINE key to return the machine to
ONLINE condition, turn OFF/ON the power of this machine.
Password
[ ]
Enable
+
[ ]
–
Password
[ ]
Disable
+
[ ]
–
ESC
PREV
SEL
NEXT
ESC
PREV
SEL
NEXT
Password
0000
[
]
[
]
–
+
4.15 Network setting
Mode
[ ]
AUTO
+
[ ]
–
ESC
PREV
SEL
NEXT
Mode
[ ]
FULL100M
+
[ ]
–
Mode
[ ]
HALF100M
+
[ ]
–
Mode
[ ]
FULL10M
+
[ ]
–
Mode
[ ]
HALF10M
+
[ ]
–