Filter
Top Products
15
2
COMPONENT NAMES AND FUNCTIONS
2.1 Overview
Number Name Function
1 Front Door Is opened to replace magazine or water, or to clear a donor/receiver
jam.
2 Water Bottle Contains the water to be applied to the donor.
3 Receiver Magazine Compartment Contains the receiver magazine.
4 Water Filter Removes any foreign matter from the water.
5 Operation Panel Operation keys and indicator lamps are located here
(see pages 16 and 17).
6 Auto Calibrator Reads the density reference pattern and performs the calibration
(standard color condition setup). (See page 61.)
7 Right-hand Side Upper Door Is opened to clear a donor/receiver jam.
8 Thermal Processing Unit Transfers an image to the receiver. The door of this unit is opened
to clear a donor/receiver jam.
9 Power Switch Turns the Power ON ( )and OFF ( ).
10 Inner Door Lock Lever Locks the inner door. Also releases the nip roller for donor
transport.
11 Thermal Processing Unit Opens the thermal processing unit. Also opens the thermal unit
Release Lever door to clear a donor/receiver jam.
12 Front Lower Door Is opened to replace the donor magazine or to clear a donor/receiver
jam.
13 Inner Door/Donor Magazine Contains the donor magazine.
Compartment
14 Refuse Compartment Is opened for refuse removal.
15 Casters Two casters are provided at both the front and rear for moving the
machine.
16 Left-hand Side Lower Door Is opened to clear a donor/receiver jam.
17 Left-hand Side Upper Door Is opened to clear a donor/receiver jam.
18 Side Air Filter Cleans the air drawn in by the fan to cool the interior of the machine.
19 Print Tray Finished prints are discharged into this tray.
20 Power Plug Three-pin grounded plug
21 Power Cable Connects the machine to a power outlet.
22 Interface Connector Connects the Ethernet cable to the main body.