Filter
Top Products
49
4
HOW TO USE THE OPERATION PANEL
To change the print size, follow the procedure below.
NOTE: The print size can be changed (between Double Letter and Letter) when a 305- mm donor and 279- mm
receiver are set.
1
.
Press the ONLINE key on the operation panel to switch
the machine to OFFLINE condition.
2
.
When the machine is in OFFLINE mode, press the NEXT
key twice.
★ The message changes to "Configuration".
3
.
Press the SEL key.
★ The message changes to "Size".
4
.
Press the + or – key to select the print size.
★ Each time the + key or – key is pressed, the indicated
print size changes to Double Letter or Letter.
5
.
Press the ONLINE key to return the machine to ONLINE
condition.
When a 305-mm donor and 297-mm
receiver are set.
4.3 Changing the Print Size
Configuration
ESC
PREV
SEL
NEXT
Size
ESC
PREV
SEL
NEXT
[ ]
DP
+
[ ]
–
–DP+
– LET +
[ ]
[ ]
[ ]
[ ]