Filter
Top Products
55
4
HOW TO USE THE OPERATION PANEL
To check the remaining quantity of the donor and receiver and the processing capability available
with the currently loaded water, follow the procedure below.
NOTE: The counters are reset when a replacement is detected. This menu appears only when "Counter" in
"Configuration" is enabled.
Note that the proper counters may not appear if a replacement is made with the power set to OFF (O) or during
printing.
4.8 Checking the Remaining Consumables
1
.
Press the ONLINE key on the operation panel to switch
the machine to OFFLINE condition.
2
.
When the machine is in OFFLINE mode, press the SEL
key.
★ The message changes to "Counter Display".
■ To check the remaining donor
3
.
Press the SEL key.
★ The message changes to "Donor".
4
.
Check the approximate quantity of remaining donor.
★ The remaining quantity is displayed.
■ To check the remaining quantity of the remaining
receiver
5
.
Press the NEXT key.
★ The message changes to "Paper".
6
.
Check the approximate quantity of remaining receiver.
★ The processing capability is displayed.
Counter
ESC
PREV
SEL
NEXT
[ ]
Enable
+
[ ]
–
Doner 130sheets
ESC
PREV
SEL
NEXT
Paper 130sheets
ESC
PREV
SEL
NEXT