Filter
Top Products
105
6
DONOR/RECEIVER JAM CLEARING PROCEDURES
1
.
Open the front lower door, raise the thermal processing unit
release lever "J11", and slowly open the thermal processing
unit to the right.
CAUTION:
The thermal processing unit is hot. Do not touch the thermal
processing unit immediately after opening it.
2
.
Rotate the "J5" knob clockwise to move the jammed donor
into the refuse compartment.
3
.
Pull out the refuse compartment and open its cover.
4
.
Push up the "J9" guide to remove the jammed receiver.
NOTE: If you do not find any paper, check the exit of the thermal
processing unit.
5
.
Close the thermal processing unit.
6.8 Jamming at Locations "5 and 9"
Thermal
Processing
Unit
Front Lower
Door
"J11" lever
"J5" knob
Refuse
Compartment
"J9" guide