Filter
Top Products
69
4
HOW TO USE THE OPERATION PANEL
4.15 Network setting
6
.
Press the SEL key.
★ Screen for setting DHCP/BOOTP opens. When the
function of DHCP/BOOTP is to be enabled, select
"Enable" using the - or + key and when it is to be disabled,
select "Disable".
7
.
Press the NEXT key.
★ Screen for setting RARP opens. When the function of
RARP is to be enabled, select "Enable" using the - or +
key and when it is to be disabled, select "Disable".
8
.
Press the NEXT key.
★ Screen for setting APIPA opens. When the function of
APIPA is to be enabled, select "Enable" using the - or +
key and when it is to be disabled, select "Disable".
NOTE: When DHCP/BOOTP is set to "Disable", APIPA function will
not work even if APIPA is set to "Enable".
9
.
Press the NEXT key.
★ Screen for setting IP address opens. IP address currently
set is displayed at this time.
Move four figures to be changed using the SEL key and
change numeric figures using the - or + key. (Numeric
figures from 0 ~ 255 can be used).
NOTE: When setting of DHCP/BOOTP or RARP is "Enable", the set
numeric figures can only be displayed, not changed.
DHCP/BOOTP
[ ]
Enable
+
[ ]
–
DHCP/BOOTP
[ ]
Disable
+
[ ]
–
ESC
PREV
SEL
NEXT
RARP
[ ]
Enable
+
[ ]
–
RARP
[ ]
Disable
+
[ ]
–
ESC
PREV
SEL
NEXT
APIPA
[ ]
Disable
+
[ ]
–
APIPA
[ ]
Enable
+
[ ]
–
ESC
PREV
SEL
NEXT
IP Address
[ ]
192.168.001.112
+
[ ]
–
ESC
PREV
SEL
NEXT