Filter
Top Products
Setup Mode
USING SETUP MODE
User's Manual 5-25
MENU1 and
MENU2 Items
Table 5.3 MENU1 and MENU2 Items and Options (Cont.)
NOTES:
• Underlined options are the factory defaults.
• Asterisks identify items and options that differ for the IBM XL24E and
Epson ESC/P2 emulations. The notes are defined at the end of the table.
Options Description
<WIDTH> 13.6 IN 13.6-inch page width
(*6) 11.4 IN 11.4-inch page width
11.0 IN 11-inch page width
8.0 IN 8-inch page width
<ZEROFNT> Specifies whether to print the number
(*3) zero with a slash. This is useful to
distinguish the capital letter “O”
from the number “0”.
Invalid for some soft fonts.
NO-SLSH 0
SLASH 0/
<DC3-CDE>
ENABLE Enables the DC1 and DC3 codes.
(*5) Any data received between DC3 and
the next DC1 is ignored.
DISABLE Disables the DC1 and DC3 codes.
These codes are then ignored.
<CR-CODE>
CR ONLY No line feed is added to a carriage
return.
CR & LF A line feed is added to each carriage
return.
#05 Chapter 5 2000.09.20, 2:36 PM25