Filter
Top Products
SETTING UP
2-22 User's Manual
Here are some points to help you determine which emulation to select:
√ Determine which emulations your software supports. (Refer to
your software documentation.) Since most software programs
support this printer, try to run a program with the factory
default emulation first. (DPL24C␣ PLUS emulation is the factory
default.) Try this emulation even if you are not sure of which
emulation to choose. See Chapter 5 for detailed information
about how your printer communicates with your software.
√ If you are using more than one software package, determine
which emulation is supported by the software you use most
frequently. Select that emulation.
√ If your software supports more than one emulation, select the
DPL24C PLUS emulation if possible. This emulation has the
greatest capabilities.
√ If you want to use an emulation that is not supported by your
software, contact your software manufacturer or printer dealer
and ask whether support is available. You may be able to
obtain a printer driver that is not shipped with the original
software package.
To select an emulation, proceed as follows:
1. Turn the printer on and load a sheet of paper.
To change a single printer setting, such as the emulation, you
can use a single sheet paper. To change several printer settings
as described in Chapter 5, you must load continuous forms
paper. See Chapter 3 for paper loading instructions.
#02 Chapter 2 2000.09.20, 2:32 PM22