Filter
Top Products
SETTING UP
2-20 User's Manual
Shutter
Parallel
Groove for
holding
cable
Serial
Clip
Connecting the Interface Cable
To connect the interface cable:
1. Turn off both the printer and the computer.
2. Pushing the top of the shutter on the right side of the printer by
the thumb, lift the bottom of the shutter by fingers until the
shutter stays open to access the connector.
Opening the shutter
3. Attach the interface cable to the connector. If your printer has a
dual interface, use the appropriate connector.
Connecting the interface cable
#02 Chapter 2 2000.09.20, 2:31 PM20